Flat and low-slope roofs play by different rules — drainage, not slope, keeps them dry. DFW Roofing LLC provides flat roofing in Dallas, TX: repairs, replacements, and new installations for homes, additions, and commercial buildings using TPO, EPDM, and modified bitumen membranes. Licensed & insured, free inspections, and a workmanship warranty.
If you're dealing with any of these issues, our Flat Roofing service can help.
Water that sits for days after rain is the #1 enemy of flat roofs — it stresses seams, feeds leaks, and adds dangerous weight to the structure.
Foot traffic, dropped tools, and debris puncture single-ply membranes. Small holes let in surprising amounts of water before anyone notices.
Whether heat-welded or adhered, seams are where membrane roofs fail first. Separated seams let water spread underneath across wide areas.
Leaves and debris block internal drains and scuppers, backing water up across the roof and turning a maintenance issue into a leak.
Where the flat roof meets parapet walls and edges, flashing details take the most weather abuse — and fail first when neglected.
Trapped moisture and heat blister the membrane surface. Small blisters are cosmetic; large or widespread ones signal a failing system.
Vents, pipes, and HVAC curbs punch through flat roofs. Each penetration is a potential leak point if its flashing is not maintained.
Old coatings chalk, crack, and peel, leaving the membrane beneath exposed to UV and weather. Recoating buys time; a failing membrane needs replacement.
Flat roofing covers roofs with little or no slope — typically under a 3:12 pitch — found on commercial buildings, modern homes, additions, garages, and covered patios. Because water cannot run off by gravity, flat roofs rely on watertight membrane systems and engineered drainage. The materials and details are completely different from sloped shingle roofs, which is why flat roofing demands a specialist.
Every flat roof problem traces back to water that does not leave. Proper design gives the roof slight slope toward drains, scuppers, or gutters, and keeps those outlets clear. When drainage works, membranes last and leaks stay rare. When it does not, standing water finds every weak seam and flashing detail. That is why our flat roof inspections always start with drainage — fix the water's path, and you fix the roof's future.
We install the three proven systems: TPO (white, heat-welded seams, excellent in Texas heat), EPDM (tough black rubber with a long track record, especially good for simple roof shapes), and modified bitumen (multi-layer asphalt-based systems valued for durability and straightforward repairs). Each has real strengths; the right pick depends on your roof's shape, use, and budget. We explain the practical differences plainly and recommend what fits your building.
Flat roofs reward simple maintenance: keep drains and scuppers clear, remove debris and standing branches, limit foot traffic to service paths, and fix small punctures quickly. A routine professional inspection catches seam and flashing issues while they are still minor. Our free inspections include a drainage and membrane check — see our commercial roofing page for business properties, or Dallas service area details for where we work.
Simple, transparent, and hassle-free from start to finish.
Call (972) 853-6474 or request an estimate. We inspect the membrane, seams, flashing, and — critically — the drainage.
We recommend the right membrane system for your roof and provide a clear, itemized written estimate.
We complete the work with proper slope-to-drain detailing, watertight flashing, and daily cleanup.
We walk the finished roof with you and outline simple maintenance that protects your investment.
A local Dallas roofing company you can rely on.
Full licensing and insurance for your protection on every job, large or small.
Thorough roof assessments with photos — so you see exactly what we see before spending a dollar.
Itemized written estimates with honest recommendations. No hidden fees, no surprise add-ons.
Every repair is backed by our workmanship warranty for lasting peace of mind.
Explore other services that pair well with flat roofing.
Flat and low-slope systems for offices, warehouses, and retail buildings.
Learn More →We proudly provide flat roofing across Dallas and surrounding DFW communities.
Answers to common questions about our flat roofing service.
Ponding usually means inadequate slope to drains, clogged drains or scuppers, or structural sagging. Standing water accelerates membrane and seam failure, so it is worth addressing promptly — our inspection identifies the cause and the fix.
TPO is a white heat-welded membrane that reflects Texas heat well. EPDM is a durable black rubber membrane with a long history. Modified bitumen is a multi-layer asphalt system known for toughness and easy repairs. We recommend based on your roof's shape, use, and budget.
Isolated punctures or a few bad seams on a sound membrane are repairable. Widespread seam failure, saturated insulation, or persistent ponding point to replacement. Our free inspection includes a moisture assessment for an evidence-based answer.
Most flat roof damage is repairable: punctures get patched, failed seams get re-welded or resealed, and flashing gets rebuilt. Replacement becomes the smart move only when damage is widespread or the membrane itself is worn out.
Keep drains and scuppers clear of debris, remove branches and standing objects, minimize foot traffic, and repair small punctures promptly. A professional inspection after major storms and every couple of years catches small issues early — ours are free.
Flat roofs need a specialist — get one. Call DFW Roofing LLC for a free flat roof inspection and an honest, itemized estimate.
☎ Call Now Request an Estimate